Mon-Fri, 7:00 AM-4:00 PMCall Big Bend Services(850) 819-6031

Miramar Beach, Walton County

Garage Door Repair in Miramar Beach, Florida

Repairs to commercial, roll-up and home garage doors at Miramar Beach properties, plus new doors and openers.

Large white garage door with a row of window panels on a stucco building

Commercial and residential garage doors in Miramar Beach

Big Bend Services, Inc. repairs and installs garage doors at businesses, condo and multi-unit buildings and houses in Miramar Beach, ZIP 32550. That covers roll-up doors and commercial sectional doors as well as the single and double doors on a house.

Call (850) 819-6031, Monday to Friday from 7:00 AM to 4:00 PM, or use the form. Tell us the type of building and what each door is doing, and you will get a written quote for the job.

Metal warehouse building with gutters and corner downspouts

Commercial doors

Roll-up and commercial sectional doors

  • Roll-up doors

    A curtain of steel slats that coils onto a barrel above the opening and runs down steel guides at each side.

  • Commercial sectional doors

    Larger, heavier versions of a house door, made of panels hinged together and running in tracks. Springs, cables, rollers and track are replaced with parts sized for the door.

  • Operators

    The motor unit on a commercial door is repaired, or replaced when it has failed.

Dark steel overhead door on a small commercial building

Roll-up repairs

What goes wrong on a roll-up door

  • Curtain out of the guides

    The small end pieces on each slat keep the curtain in its guides. When they wear or the curtain is struck, slats pull out and the door jams. The curtain is set back in and worn ends are replaced.

  • Door drifts down or will not stay up

    The spring inside the barrel has lost tension. The tension is reset, or the spring is replaced.

  • Curtain rolls up crooked

    One guide is bent or has moved out of plumb, and the curtain winds unevenly on the barrel. The guide is straightened and refastened.

  • Bottom bar bent

    A bar struck by a vehicle or cart keeps the door from sealing at the floor, and it is replaced.

Steel roll-up door at the loading bay of a metal warehouse

Operators

When a commercial operator runs but the door does not

  • Operator hums, door stays

    The hand chain or manual release is still engaged, a lock bar is across the door, or the spring has lost tension and the door is too heavy to move.

  • Door moves partway and stops

    The travel limits are out of adjustment, or the door binds in its guides at one spot.

  • Operator is dead

    No power at the operator, or a failed control board.

Stucco home with an almond raised-panel garage door

Multi-unit buildings

Several doors in one building

A condo building with a row of unit garages, or a shared garage behind a door, can put every door that needs work in one request.

  • Which doors

    List them by unit number or by where they sit on the building, so each one can be found.

  • What each door does

    Stuck, noisy, crooked, reversing or damaged. A few words per door is enough.

  • Who gets the quote

    The association, the manager or the owner. Say which, and how to reach them.

Large metal building with a big overhead door and a walk-in door

Safety sensors

A Miramar Beach door that reverses or will not close

Two small sensors sit a few inches above the floor, one on each side of the opening, and aim a beam at each other. If the beam is broken while the door is closing, the opener sends the door back up.

  • Out of line

    A bin, a bicycle or a bumper can nudge a sensor bracket and turn it away from its partner. The sensor is set back in line.

  • Blocked or dirty lens

    A box, a cobweb or a film on the lens can break the beam.

  • Damaged wire

    The wire from each sensor runs along the wall to the opener. A pinch or a staple through it cuts the signal, and the wire is replaced.

  • Failed sensor

    A sensor that stays dark after it has been lined up and cleaned is replaced.

Garage door safety sensor mounted low on the door track

Other reasons a door turns back

When the sensors are lined up and clear and the door still reverses, the opener is reacting to resistance. A door that binds in its track, a roller that catches, or a force setting that is too light makes the opener behave as if it has hit something. The part that binds is repaired, and the opener force and travel settings are reset to suit the door.

Single-story home with three white garage doors side by side

House doors

Garage doors at Miramar Beach houses and townhomes

  • Broken spring

    A loud bang from the garage and a door that will not lift. The spring is replaced.

  • Cable, roller or hinge

    A frayed cable, a worn roller or a cracked hinge is replaced so the door runs straight and quiet.

  • Off track

    A door that has come out of its track is set back in, and bent track is straightened or replaced.

  • New door

    A new door is measured to the opening, with a new opener if you want one.

Steel hinge and roller on a white garage door section

Access

Rentals and owners who are away

For a rental, a second home or a managed building, the person who calls is not always the person on site.

  • Access

    Give us a contact who can open the garage or the service door.

  • Other services

    Gutters, shelving and blower door testing can go on the same request.

Steel roll-up door in the brick wall of a commercial building
Dark brown carriage-style garage door on a brick two-car garage

Same county

Garage door repair in other Walton County towns

White sectional garage door raised halfway on a single-story home

What to expect

How Miramar Beach garage door work is booked

  1. 1

    Contact

    Call (850) 819-6031 or send the form. Tell us the town and what needs work.

  2. 2

    Property visit

    We come out, look at the job and take the measurements we need.

  3. 3

    Written quote

    You get a written price for the work before anything starts.

  4. 4

    Work completed

    We do the work, test it and clean up the work area.

Get a Quote

New garage door sections and track stacked inside a garage

FAQ

Miramar Beach garage door questions

Have another question? Call (850) 819-6031.

My roll-up door is stuck halfway. Should I force it?
No. A jammed roll-up curtain can be caught in a guide, and forcing it can bend the slats. Leave it where it stopped and call the office.
Can a roll-up door be opened by hand if the operator fails?
Commercial operators can have a chain hoist or a release for opening the door by hand. If yours has one, use it to open the door while you wait for the repair.
Can the sensors be moved if carts keep knocking them?
Yes. The brackets can be set farther into the door frame, where carts and pallets do not reach them, while staying at the same low height across the opening.
How can I tell if the sensors are lined up?
Each sensor has a small light. When both glow steadily, the pair can see each other. A light that is out or blinking means the beam is not getting through.
Can a manual roll-up door get an operator later?
Yes. A roll-up door that runs freely by hand can have an operator added, so it opens with a button instead of the chain or by lifting.

Get a quote

Request Garage Door Repair in Miramar Beach

Tell us the Miramar Beach address, the type of building, how many doors need work and who can give access.

(850) 819-6031

511 S Highway 71, Wewahitchka, FL 32465
Monday to Friday, 7:00 AM to 4:00 PM

White sectional garage door with a window row raised to show a clean garage

Your information is used to respond to this request. See our Privacy Policy.