Mon-Fri, 7:00 AM-4:00 PMCall Big Bend Services(850) 819-6031

Garage doors

Commercial Garage Doors and Roll-Up Doors in the Florida Panhandle

Repairs and new doors for commercial sectional doors and roll-up doors on business buildings.

Metal warehouse building with gutters and corner downspouts

Garage doors for business buildings

Big Bend Services, Inc. repairs and installs commercial garage doors, including sectional doors and roll-up doors, on business buildings in the counties we serve. Requests can come from the business owner, the property owner, a property manager or a contractor working on the building.

Call (850) 819-6031, Monday to Friday, 7:00 AM to 4:00 PM, or send the form with the door type, the size of the opening and what the door is doing. You get a written quote for the work.

Dark steel overhead door on a small commercial building

Door type

Roll-up or sectional: telling them apart

  • Roll-up door

    A curtain of narrow steel slats that coils onto a barrel above the opening when it goes up. Nothing runs back along the ceiling.

  • Sectional door

    Wide panels joined by hinges, with rollers that run in a track. When it opens, the panels turn and lie back along the ceiling or up the wall.

  • Not sure which you have

    Describe how the door moves as it opens, and that is enough to tell which type it is.

Steel roll-up door at the loading bay of a metal warehouse

Roll-up doors

Roll-up door repairs

Springs inside the barrel balance the curtain, and a guide on each side of the opening keeps it in line.

  • Curtain out of its guides

    A curtain that has jumped a guide is set back in, and slats pushed out of line by an impact are replaced.

  • Bent guides

    A guide bent by a vehicle or a pallet makes the curtain bind and stick. It is straightened or replaced.

  • Hard to raise, or will not stay up

    The barrel springs are the cause. Their tension is reset, and a broken spring is replaced.

  • Comes down crooked

    A curtain that lands lower on one side has slats that have shifted sideways. The slats are set back in line so the curtain meets the floor evenly.

  • Bottom seal

    The rubber seal along the bottom closes the gap at the floor. A torn or flattened seal is replaced.

  • Screeching or shuddering

    A curtain that shudders or screeches on its way up is dragging in a guide or running on bent slats. The guides are cleaned and lined up and the damaged slats replaced.

Service building with a white overhead bay door raised open

Sectional doors

Commercial sectional doors

A commercial sectional door works like a garage door on a house, with wider sections and heavier springs.

  • Springs

    A broken spring is replaced with a new one rated for the weight of the door.

  • Cables and rollers

    Frayed cables and worn rollers are replaced so the door rises level and quietly.

  • Track and hinges

    Track knocked out of line and cracked hinges are straightened or replaced.

  • High track

    Where the ceiling is tall, the track can run up the wall before it turns, so the open door sits above lights and racks.

  • Seals

    The rubber along the bottom of the door and the seals on the jambs and header are replaced when they tear or pull away.

  • Sections hit by a vehicle

    A struck section is repaired or replaced. A door with damage across several sections is quoted as a new door.

Long warehouse wall with a row of loading dock doors

Doors raised by a motor, a chain or by hand

A hand chain turns a gear on the barrel or the spring shaft, and a chain that slips or jams is part of the door repair. Tell us whether your door runs on a motor, a hand chain or is pushed up by hand. If a motor-driven door hums, stops partway or ignores its controls, describe that too, since opener repair and new openers are part of our garage door work.

Large white garage door with a row of window panels on a stucco building

New doors

Commercial garage door installation

When a door is past repair, or a building has an opening with no door, we measure the opening and quote a new commercial door for it.

  • How hard it will work

    Tell us how many times a day the door opens and what passes through it. A door that runs all day needs springs rated for many more cycles than one that opens twice a day.

  • Motor or manual

    Say whether the new door should run on a motor or be raised by hand or chain, and where its controls should be mounted.

Detached workshop with a tan steel rolling door and a side entry door

Your request

What to send with a commercial door request

  • Property and contact

    The business name, the property address, the person to speak to on site, and a second contact for days when that person is away.

  • How many doors

    If several doors need work, list each one with what it is doing and where it sits on the building.

  • Building hours

    The days and hours the building is open, which doors can be closed off while they are worked on, and who can let us in.

Large metal building with a big overhead door and a walk-in door
Row of gray roll-up doors along a long low commercial building

Where we work

Commercial doors across the Panhandle

Not sure which county you are in? Call (850) 819-6031 and we will tell you.

Commercial building with a tall glass-panel aluminum overhead door

What to expect

How a commercial door request is handled

  1. 1

    Contact

    Call (850) 819-6031 or send the form. Tell us the town and what needs work.

  2. 2

    Property visit

    We come out, look at the job and take the measurements we need.

  3. 3

    Written quote

    You get a written price for the work before anything starts.

  4. 4

    Work completed

    We do the work, test it and clean up the work area.

Get a Quote

Commercial building with a raised loading bay door and a row of roll-up doors

FAQ

Commercial garage door questions

Have another question? Call (850) 819-6031.

Whose name should go on the request?
Give the name and number of the person who approves the work, and say if that is someone other than the contact on site.
Can a roll-up door be swapped for a sectional door?
It depends on the space around the opening. The coil of a roll-up needs room over the opening, while a sectional door needs headroom and a clear ceiling behind it. The door quoted is the type that fits.
Why does our motor-driven door reverse on the way down?
With nothing in the way, the cause is a blocked or misaligned safety sensor, a damaged sensing edge along the bottom of the door, or a force setting that is off.
What should we do if a roll-up door is stuck open?
Keep people and vehicles out from under it and do not force it down. A curtain that will not come down has jammed in a guide or on bent slats, and forcing it can bend more of them.
Can a motor be added to a roll-up door that is raised by hand?
A motor can be added when there is power at the opening and room beside the barrel to mount it.

Get a quote

Send a Commercial Garage Door Request

Send the details with the form, and the office will follow up.

(850) 819-6031

511 S Highway 71, Wewahitchka, FL 32465
Monday to Friday, 7:00 AM to 4:00 PM

Metal shop building with a steel overhead door raised on a gravel lot

Your information is used to respond to this request. See our Privacy Policy.