Chipley, Washington County
Seamless Gutters and Gutter Service in Chipley, FL
Seamless gutters made at the property, guards over sound gutters, and the rest of the gutter work a house or business needs.

Gutter work at Chipley addresses
Big Bend Services, Inc. puts up new seamless gutters in Chipley and handles the rest of the gutter work as well: repairs, replacement, cleaning, guards and downspouts, on houses and on commercial buildings. Chipley addresses use ZIP code 32428.
Call (850) 819-6031 or send the form with the address and what you want done. The request does not need the name of a service; a plain description of what the gutters are doing is enough to start. Our office is in Wewahitchka and answers calls Monday to Friday, 7:00 AM to 4:00 PM.

What we handle
Gutter services for Chipley properties
Formed on site
Seamless gutters made to each roof edge
A seamless gutter starts as a flat coil of metal. A forming machine at the property bends it into gutter shape, and each piece is cut to the length of the roof edge it will hang on. A straight run comes off the machine as one piece, so nothing joins it partway along. The only joints on the system are at corners, end caps and the outlets where downspouts connect.
Fewer joints leave fewer places for water to get out before it reaches a downspout.
6-inch as standard
Our standard seamless gutter is 6 inches wide.
Half-round in aluminum or copper
Where a rounded profile suits the building, half-round gutters are available in either metal.
Color picked to match the trim
The gutter color is chosen to go with the trim, so new runs look like part of the house.
Hung with a fall
Each run hangs from the fascia along its whole length and is set with a slight fall toward its outlet, so it empties after a rain.

Trading old gutters for seamless runs
When a house or shop has gutters that leak at joint after joint, rust through, or sag along most of their length, the job is a replacement rather than a patch. The old gutters and hangers are taken down and hauled away, and new seamless runs go up in their place.
The new system does not have to copy the old one. Runs can be made longer, downspouts can be put in better spots, and a roof edge that was left bare can get a gutter in the same job.

Guards
Guards over the gutters you have now
Gutter guards fit over existing gutters, so sound gutters stay up. Before a guard goes on, the gutter is cleaned out, and any leaking corner, loose hanger or low spot is repaired. A guard laid over a fault would only hide it.
Less in the trough
Guards keep leaves, pine needles and twigs from settling in the gutter, so less builds up between cleanings.
Still a little upkeep
Fine grit can pass through, and small debris can sit on top of a guard, so guarded gutters still want a look now and then.
Capacity stays the same
A guard does not change how much water a run can carry. A gutter that spilled over for lack of downspouts needs another downspout, not a guard.
Cleaning under guards
Gutters that already have guards on them can usually be cleaned too.

Repairs
Fixing the gutter already on the house
A repair deals with the fault where it starts and leaves the rest of the run alone.
Drip at a corner or seam
The joint is cleaned and resealed, or the corner piece is replaced when a seal will not hold.
A run that dips or pulls away
Hangers are refastened, extras go in where the spacing was too wide, and the run is set back to a steady fall toward its outlet.
A downspout in pieces
Loose elbows and sections are joined again and strapped to the wall.
A section knocked loose in a storm
It is put back up or replaced. The repair quote is written, so you can pass it to your insurer if you file a claim.

Downspouts
Putting roof water where it belongs
Each downspout lets out all the water from its stretch of roof at one spot. When that spot is a porch step, a path or the foot of a wall, the answer is downspout work.
Move an outlet
The downspout goes to a spot where the ground can take the water.
Extend it
An extension or splash block carries the flow out from the wall.
Add one
A long run gets a second downspout so it drains at both ends.
Where our work stops
Drainage work ends above ground at the downspout. We do not put in underground pipe or French drains, and we do not grade yards.

Chipley offices, shops and new buildings
Chipley is the Washington County seat, and its commercial buildings get the same gutter services as houses. Offices, shops, restaurants, warehouses and churches are all part of our work. Commercial jobs are scheduled around your business hours, so doors and parking stay open to customers.
For a building under construction or a new addition, the gutters are scheduled around the builder once the roof and fascia are finished.

What sets the price, and what to send
The price comes down to how many feet of gutter the building needs, how many downspouts it takes and how high the work sits. Second stories and steep roofs take longer to set up. Half-round, copper and guards are priced when you ask for them. You get one written price for the whole job.
For a leak or a loose run, mention which wall it is on. If the yard is fenced, give the gate code or say who can open the gate; gutter work is all outside, so nobody has to be home.


Same county
Gutter pages for nearby towns

What to expect
From first call to finished gutters
- 1
Contact
Call (850) 819-6031 or send the form. Tell us the town and what needs work.
- 2
Property visit
We come out, look at the job and take the measurements we need.
- 3
Written quote
You get a written price for the work before anything starts.
- 4
Work completed
We do the work, test it and clean up the work area.

Can one gutter piece span the whole front of a house?
Should guards go on at the same time as new gutters?
Do seamless gutters still need cleaning?
Will you tell me about damage found while cleaning?
Will you work on gutters another company hung?
Can the gutter work be booked with other jobs at the same address?
Get a quote
Request Gutters in Chipley
Tell us the Chipley address and what the gutters need, and the office will call to set up a time.




