Apalachicola, Franklin County
Half-Round Gutters and Gutter Repair in Apalachicola, Florida
For owners who want a rounded gutter on an older building, and for gutters that drip at a joint.
Gutter work for Apalachicola buildings
Big Bend Services, Inc. installs half-round gutters at Apalachicola houses and commercial buildings in ZIP code 32320, and repairs gutters that drip at their joints and corners. The rest of the gutter service is here too: seamless gutters formed on site, replacement, cleaning, guards and downspouts.
Apalachicola jobs are booked through our Wewahitchka office at (850) 819-6031, weekdays 7:00 AM to 4:00 PM, or with the form. Give the address and what you want done, and the written quote covers the whole job.
Half-round gutters
Half-round gutters in Apalachicola
Half-round gutter has a rounded trough instead of a flat front. On an older building it gives the eave a shape that suits the rest of the roofline.
Aluminum
The rounded shape in a color picked to go with the trim.
Copper
Left as bare metal. It starts bright, darkens to brown with age and can turn green over the years, and it sets its own color against whatever trim the building has.
Capacity
A half-round gutter holds less water than a standard gutter of the same width, so on a large roof section the number and spacing of downspouts matter more.
On the quote
Name the metal when you ask, since the quote is written for one or the other.
The standard gutter
Where half-round is not wanted, our standard 6-inch gutter is formed seamless on site to the length of each roof edge.
Gutters on an older roofline
Apalachicola has a stock of older buildings, and an older eave is not always perfectly straight or level. A gutter still has to fall steadily toward its outlet, so it is hung to that fall rather than to the line of the roof edge. On a building that has had gutters added in pieces over the years, the runs can be replaced together so they drain as one system.
Tell us if the building has a covered porch, a balcony or a second story, since each roof edge at each height gets its own run.
Joint repair
Joints and corners that drip
Corners
Where two runs meet at a turn in the building. A corner that drips is resealed, or rebuilt where the seal will not hold.
End caps
The closed ends of a run. A cap that has split or come loose is resealed or replaced.
Outlets
Where the gutter joins the downspout. The joint is sealed and the downspout refastened.
Laps on sectional gutter
Every place two lengths overlap is a joint, resealed the same way as a corner.
A damaged length
A split or rusted-through piece comes out and a new piece goes in, sealed at each end.
When dripping joints mean new gutters
The picture changes on an old sectional system where a joint is resealed and the next one along starts to drip, or where resealed joints let go again soon after. At that point the joints themselves are the problem, and the run is replaced with seamless gutter. The old gutters are taken down and hauled off as part of that job.
Moving from a standard gutter to half-round, or from aluminum to copper, is also a replacement rather than a repair, because the new profile needs its own hangers and fittings.
Your quote
What changes the price of the work
Profile and metal
The gutter chosen from the options above.
Length
How many feet of eave get new gutter, or how many joints need work.
Height
A second story or a tall commercial front takes more setup than a low porch roof.
Downspouts
How many outlets the roof needs.
Overflow and water behind the gutter
Water sheeting off the front edge is overflow, from a blocked outlet or too few downspouts. Water running down the wall behind the gutter means it sits too low or too far from the roof edge. Each of these has its own fix, so tell us which one you see and where on the building it happens.
Before you call
What to tell us about the drip
Where
The wall and the corner, end or outlet where the drip comes from.
When
In every rain, or only when it pours.
What kind of gutter
Half-round or standard, aluminum or copper, sectional or seamless, if you know.
What else is wrong
A sag, a loose run or a downspout off the wall near the drip.
Storm damage and new building
Storm repairs and new buildings
Storm damage
Sections knocked loose are reattached or replaced, and the repair quote comes in writing so you can pass it to your insurer.
New construction
Gutters for a new building are scheduled around the builder, once the roof and fascia are finished.
Buildings with no gutters
Houses, porches and outbuildings that never had gutter can have new runs added.
Upkeep and other work
Cleaning, guards and sags
Sagging runs
Hangers reset or added so a dropped section drains to its outlet again.
Cleaning
Done by hand, with each downspout flushed and the debris hauled off.
Guards
Fitted over existing gutters that have been cleaned and repaired first.
Downspouts
Moved, extended or added, all of it above ground. Buried drain pipe, French drains and grading are not our work.
Commercial
Shops, offices and churches in Apalachicola
Commercial buildings get the same gutter service as houses, booked around business hours.
Half-round on a shop front
Half-round can run along a shop front or an office eave as well as a house.
Access on the day
Tell us which entrances have to stay usable and who can give access on the day.
Same county
Gutter pages for other towns nearby
What to expect
From request to finished gutters
- 1
Contact
Call (850) 819-6031 or send the form. Tell us the town and what needs work.
- 2
Property visit
We come out, look at the job and take the measurements we need.
- 3
Written quote
You get a written price for the work before anything starts.
- 4
Work completed
We do the work, test it and clean up the work area.
Will you work on gutters another company put up?
Can a joint be resealed while it is raining?
Why does my gutter only drip in a heavy rain?
Do you fix gutters on a porch roof?
Can a landlord have several buildings looked at together?
Can gutter cleaning be set up to repeat?
Get a quote
Request Gutters in Apalachicola
The office will reply to the form and arrange a time to come out.
